Products

Product Model: 8010 /8010S

PRODUCTS

CONTACT US

Product Model: 8010 /8010S

Product Description

Compatible Substrates

  • Acrylic sheets, PET, PVC paper, PVC film

  • Aluminum skin / density board, foam board, wood-plastic, stone-plastic

  • Slab stone, calcium silicate board, aluminum board, etc.


Product Features & Description

  1. General-Purpose Flat Lamination Adhesive
    Specially formulated for building material substrates such as slab stone, magnesium oxide board, and calcium silicate board, with strong bonding adaptability.

  2. Broad Temperature Range for Application
    Recommended for use in ambient temperatures of 0–35°C or 30–45°CNo heating room required for low-temperature environments, reducing energy and equipment costs.

  3. Moderate Open Time
    6–10 minutes open time allows for easy handling in large-area or complex-shaped lamination.

  4. Important Notes

    • Lower Material Yield: Material utilization may be relatively low in practice; planning is advised.

    • Specific Formulation: Optimized for particular substrates (e.g., slab stone, calcium silicate board). Testing is recommended for unconventional materials.


Typical Applications

  • Flat lamination of slab stone, magnesium oxide board, or calcium silicate board with decorative films/papers

  • Lamination of aluminum boards, wood-plastic, stone-plastic, and other decorative composite materials

  • Film laminating for architectural interior panels and furniture surface panels


Application Guidelines

  • Temperature Control: Maintain melt temperature around 130°C for consistent viscosity.

  • Environmental Adaptability: Can be applied in 0–35°C (normal to low temperature) or 30–45°C (high temperature) environments. No additional heating is needed in low temperatures.

  • Substrate Preparation: Ensure surfaces are flat, clean, and free from oil or contamination. Porous substrates should be pre-sealed.

  • Application & Lamination: Complete lamination within the first half of the open time and apply even pressure (approx. 0.4–0.8 MPa).


Packaging & Storage

  • Packaging Form: Typically supplied as pellets; also available in rolls or blocks upon request.

  • Storage Conditions: Store in a sealed container in a cool, dry place. Avoid moisture exposure. Recommended storage temperature: 10–30°C.

  • Shelf Life: 12 months in original unopened packaging.

Product Show

Leave Your Message

Products Recommended